Ezgo Rxv Push Gas Pedal No Go Push Again and It Goes

You are here: Home / Beginner Info / 10 Common Electrical Golf Cart Accelerator Problems (With Fixes)

Your electrical golf cart'due south accelerator is one of those parts that you might not think a lot nigh until you of a sudden can't drive your golf cart any more than.

This problem is something that many owners are likely to experience at some bespeak, finding themselves stranded in a frustrating situation.

Thankfully, it should be adequately like shooting fish in a barrel to diagnose ane or more of the top 10 reasons why electric golf game cart accelerators stop working.

10 Common Electrical Golf game Cart Accelerator Bug (With Fixes)

Although other issues may occur that cause your golf cart's accelerator to work poorly, these are by far the most common.

Taking these steps in this gild should diagnose your problem, troubleshoot its extent, and making it easier to set up.

10. Loose Wire Connections

Sometimes, your cart may wiggle while you are riding it and loosen the many wires that connect the controller to the battery and other parts of your cart.

Thankfully, this is usually the most mutual reason for accelerator bug and the easiest ane to gear up without real feel by using these steps:

1. Open upwards your cart hood and observe the wires connected to your controller
2. Bank check to brand sure each of these wires is properly screwed downwardly and held in identify
3. Inspect all other wires throughout your engine and accelerators
4. Tighten the connections on these wires to ensure that they run smoothly

You should exist able to get your golf cart running smoothly again, unless you lot encounter frays on your wires that need to exist replaced or fixed – if so, go to the next department now.

9. Frayed Wires

While inspecting disconnected wire bug, it is also a expert idea to check each of your wires for frays that may be throughout their surfaces.

These frays are probable to crusade some malfunctions in your engine and must be fixed by replacing the wires with new ones or wrapping with electrical tape.

You should probably replace the wires if they get as well frayed, every bit electrical record should only be considered a temporary solution.

Replacement requires yous to remove each of the wires and add new types for the engine, only removing wires that are non directly connected to the part but their metal electrical connectors.

eight. Dead Battery

Next, y'all need to make sure that you don't have a expressionless or damaged battery on your hand, a problem that tin can be caused by problems like bad cells or connections.

Typically, this process is very unproblematic and should be something that you tin handle by post-obit these like shooting fish in a barrel tips below:

1. Check the positive and negative wires if they are loose and reconnect
2. Test your battery with a voltimeter to see how much charge it possesses
3. Charge the battery back up using the proper tools
4. Endeavour out your accelerator once again to meet if the accuse worked
5. Disconnect the battery if it will not hold a charge
6. Pull it out and replace it with a proper replacement
7. Exam this new battery'southward charge before hooking information technology up
8. Endeavor out your golf cart to see if the accelerator works

Many times, this simple set up is all that y'all'll need to do to get your accelerator working smoothly and efficiently over again.

7. Debris Most The Foot Pedal

This issue is probably the well-nigh embarrassingly common on this listing and is something that is probable if y'all are something of a regular cart driver.

Many drivers may detect that they cease upwards getting modest bits of droppings, clay, and other items stuck beneath their foot pedal.

This issue tin create a "squishy" experience for your pedal that may crusade your accelerator to run at low potential and never quite hit peak speed.

Get into your cart and use a minor hand broom and manus vacuum to get rid of any of the debris virtually your pedal.

Elevator it upwards and check for whatsoever items that may be lingering here and carefully remove them to ensure that you go your cart running smoothly.

6. Poor Potentiometer

The potentiometer is a small part of your golf cart that is rarely discussed considering information technology rarely goes bad on a golf game cart.

It provides the electrical signal to speed controller from the accelerator to signal the pedal's position and how much accuse the controller should send to the motor.

When it goes bad, the controller may read varying levels of charge that may indicate the pedal isn't pushed at all – thankfully, you lot can adequately hands supervene upon this role:

1. Trace the wire from your foot pedal up towards your speed controller
2. Identify the small office information technology connects to before reaching the controller – the potentiometer
3. Carefully remove this part from the wires and replace it with a new one
4. Shut your cart hood back up and get ready to test out your accelerator

You may as well want to test your potentiometer before y'all replace it, equally this procedure is fairly elementary and shouldn't have a lot of time.

Carefully remove the pocket-size nut on the side of the potentiometer and carefully try to motion the lever on the side with very minor movements.

Position information technology properly (you should see its indicated position on the part) and exam information technology to ensure that it has nearly 5,000 ohms when you push button the pedal to the floor.

Replace the potentiometer if the charge is erratic when you lot push the pedal or if you become no signal from it at all.

5. Management Switch Malfunction

The management switch on your cart indicates whether you're going forward, backward, or sitting in neutral.

And information technology is important for your accelerator considering it helps to let your engine know what direction to plow your wheels.

And when your direction switch malfunctions, y'all may observe yourself having to replace it because you can't accelerate. Replace this switch following these directions:

1. Remove the screws and bolts holding down the switch plate
2. Take the plate out of the cart hole equally far as you can go without tugging wires
3. Disconnect each of these wires and wrap a piece of tape around them
4. Write a number on this tape that indicates where the wire goes on your new switch
5. Attach these wires to your new management switch and put it in place
6. Spiral the switch back down properly

Test your cart now by turning it on and setting your direction switch in forwards and pushing the accelerator pedal.

Opposite direction and push the accelerator pedal – if it goes in both directions, you should exist fine with your fixes.

4. Damaged DC Converter

The DC converter is critical for taking the Air-conditioning power of your cart and turning it into a direct current that helps it run smoothly.

And if your DC converter is malfunctioned, the power you generate pressing your accelerator pedal will not exist direct current and won't create any acceleration unless you supervene upon the damaged box with these steps:

1. Trace the wires away from your speed controller until you notice a small, black box
2. Carefully undo the screws and wires holding this role in identify on your cart
3. Remove the DC converter and replace information technology with a new ane
4. Screw down the new converter and connect information technology to the proper wires

Beginning up your cart again and push the pedal to meet what kind of acceleration your cart gives you when you push button downward.

If for any reason your golf game cart even so doesn't advance, yous're getting into more difficult and technical steps that will crave more time and money investment.

3. Speed Controller

As mentioned earlier, the speed controller of your cart helps to interpret the pressure from your pedal into electrical signals that become your cart moving.

When this office ends upwards declining, there's simply not much you can do to force your cart to move and you may stop up having to supercede it.

The speed controller is a complex part that does non do well with DIY repairs, such as attempting to replace wiring elements and other features.

Instead, information technology is best to just follow these steps to go the controller out of your golf game cart and to replace information technology with an all new option instead:

1. Open up your golf game cart hood and look for the speed controller
2. Find the large, rectangular box that has wires coming directly from your foot pedal
3. Carefully unscrew all of the wires connected to this golf cart part
4. Remove the bolts belongings information technology down using a specialized wrench option
5. Put in the new controller in its place and bolt information technology back down
6. Connect the wires back to the controller, saving the battery for concluding to avert shocks

When you lot're washed, try to turn on your cart over again and button the accelerator pedal to run into how well this repair worked.

You should get an firsthand outburst of speed that is proper for your golf cart and its overall design and execution.

You should also see that your golf cart's speed meter is working properly once more – poor speed maintenance from the meter is one of the nigh common symptoms of controller failure in your cart.

two. Bad Solenoid

The solenoid is an important electrical switch that helps to keep your golf cart operating smoothly by taking electrical menses from your battery to other parts of the cart.

Unfortunately, the solenoid is oft decumbent to various types of impairment that may cease upwardly causing it to neglect on you unexpectedly.

When it does, no thing how difficult y'all printing the pedal on your cart, you're just not going to go much become upward and get.

There are a few different things that you lot can exercise to check for symptoms of a bad solenoid, such as listening for it to activate when yous press the accelerator or do anything else with the battery.

If you lot don't hear the solenoid start upwards when you lot turn the switch, it is time to replace the solenoid with a different option following these steps:

1. Open your cart hood to find the battery organisation
2. Identify the solenoid by looking at your cart schematic
3. Carefully remove the screws holding the solenoid down
4. Disconnect the wires connected to this part
5. Put in a new solenoid and reconnect it to the wires
6. Screw the solenoid back into identify

Virtually of the time, you shouldn't have to supplant a solenoid more than once or twice throughout your golf game cart's life.

If for whatever reason your solenoid keeps burning out on yous, it is time to talk to a professional who tin can inspect the remainder of your engine and figure out what is going wrong.

1. Accelerator Failure

If yous've gone through every stride in this procedure and your accelerator is yet non working properly, it might be time to replace it to give your cart a better chance to operate.

If your cart is older or has a lot of miles on it in a short time, there's a good hazard that your accelerator is only done.

Replacing information technology requires you to have a serial of careful steps that should be quite easy for most people to do:

1. Advisedly detach all of the screws holding your accelerator pedal downwards
2. Remove the pedal advisedly but pay attention to the wiring connections
3. Find the wires connected to the pedal and carefully remove them
4. Tape down these wires to the side of the cart until you're ready to replace the pedal
5. Put the new pedal in place, connect the wires, and spiral it back down

Once you've taken all of these steps, you lot should turn your golf game cart on, put it in drive or reverse, and hit the accelerator.

You should start moving in the chosen direction without delay – if you don't, there may be something incorrect with your cart beyond the accelerator.

Thankfully, this fix should accept care of virtually concerns with your accelerator, and so make sure to contact an skilful if your cart still won't move.

Understanding The Role Your Accelerator Plays

Your cart's accelerator is just i part of the organization that keeps your golf cart moving, and is the part that you'll contact the virtually as you drive.

Every bit a issue, it is important to understand a few of the most common elements of this design to give yous an thought of what kind of problems might ascend.

Get-go of all, your accelerator is connected directly to your drive controller, which connects to elements similar your DC converter, the speed meter, the battery, and your Air-conditioning motor.

When you push the pedal on your accelerator, you lot send pressure to the controller that is then converted into DC power.

Your battery sends power to your controller to help it operate, allowing it to ship electrical signals to your meter and to your AC motor.

The controller will judge how much speed your motor should create past reading the pressure you put on the accelerator and translating it to your motor.

If whatsoever of these parts cease upwards failing or running into any difficulties in your cart, there's a skilful chance that your accelerator won't work properly.

As a issue, it is of import to check for all of these elements earlier you end up resetting your motor or taking any other long-term repair steps.

bergermamme1962.blogspot.com

Source: https://www.golfcartreport.com/electric-golf-cart-accelerator-problems/

Share this post